CCGT 060208F ID4
Image match unverified- Item / entry
- 3433444
- Grade
- ID4
- Edge material
- PCD tip / carbide body
- Stated use
- Finishing aluminum and other non-ferrous materials
Specification · manufacturer examples available
CCGT 060208
80° rhombic · 7° clearance · CCGT series
Inscribed circle · IC6.35 mm
Thickness · S2.38 mm
Corner radius · R0.8 mm
Product grade and application depend on the full manufacturer designation. Confirm the holder pocket and clamping before choosing a replacement.
← Browse CCGT specificationsCCGT 060208Nominal geometry
IC 6.35S 2.38R 0.8mm
Nominal dimensions
Dimension referenceCode-table source ↗
Swipe to see the full dimension drawing →
| Property | Value | Basis |
|---|---|---|
| Inscribed circle / IC | 6.35 mm | Linked product dimensions |
| Thickness / S | 2.38 mm | Linked product dimensions |
| Corner radius / RE | 0.8 mm | Linked product dimensions |
| Basic shape / clearance | 80° rhombic / 7° | CCGT designation |
| Product tolerances | Consult product drawing | Not independently reviewed here |
These are nominal reference dimensions. Hole profile, edge construction and usable edges may differ between products.
A meaningful comparison
What changes from 060204?
Its 0.8 mm corner radius is four times that of 060202. The nominal inscribed circle and thickness are unchanged.
Swipe to compare both sizes →
| Property | CCGT 060208 ↗ | CCGT 060204 ↗ |
|---|---|---|
| Corner radiusDifferent | 0.8 mm | 0.4 mm |
| Inscribed circle | 6.35 mm | 6.35 mm |
| Thickness | 2.38 mm | 2.38 mm |
| Corner angle | 80 ° | 80 ° |
| Clearance angle | 7 ° | 7 ° |
| Family | CCGT | CCGT |
Before choosing this radius
The documented example has a PCD tip. Its edge construction and application must not be generalized to every product carrying the base size 060208.
From a size to an actual product
Documented product examples
The application belongs to the full product below. These examples are not a recommendation or a stock listing.
Does matching geometry mean I can swap these inserts?
No. Confirm the holder pocket, clamping, insert tolerances, cutting direction and complete product specification. Check grade, chipbreaker and application data for the actual workpiece and setup.
Read the base designation
CShape
CClearance
GTolerance
TConfiguration
06Size
02Thickness
08Radius
The code identifies a base geometry. Suffixes such as AS, SF, F, IC20, RTC+ or ID4 belong to a manufacturer’s product system.
Evidence, in context
Sources & review scope
Reviewed 2026-10-19. A checked field is not a product certification.
ISCAR India · CCGT 060208F ID4 (opens in a new tab)
Product specifications · manufacturer no. 3433444
What this source supports
IC, thickness, radius, grade, edge material and stated application for this product only. No stock or performance verification.
Inch values are calculated from the listed millimetre values ÷ 25.4, rounded to four decimals. Product tolerances, compatibility and cutting performance require the applicable product specification.