CCGT 060202-AS IC20
Image match unverified- Item / entry
- Catalogue entry
- Grade
- IC20
- Edge material
- Carbide
- Stated use
- Aluminum machining
Specification · manufacturer examples available
CCGT 060202
80° rhombic · 7° clearance · CCGT series
Inscribed circle · IC6.35 mm
Thickness · S2.38 mm
Corner radius · R0.2 mm
Product grade and application depend on the full manufacturer designation. Confirm the holder pocket and clamping before choosing a replacement.
← Browse CCGT specificationsCCGT 060202Nominal geometry
IC 6.35S 2.38R 0.2mm
Nominal dimensions
Dimension referenceCode-table source ↗
Swipe to see the full dimension drawing →
| Property | Value | Basis |
|---|---|---|
| Inscribed circle / IC | 6.35 mm | Linked product dimensions |
| Thickness / S | 2.38 mm | Linked product dimensions |
| Corner radius / RE | 0.2 mm | Linked product dimensions |
| Basic shape / clearance | 80° rhombic / 7° | CCGT designation |
| Product tolerances | Consult product drawing | Not independently reviewed here |
These are nominal reference dimensions. Hole profile, edge construction and usable edges may differ between products.
A meaningful comparison
What changes from 060204?
Compared with 060204, the corner radius is 0.2 mm smaller. Both share a nominal 6.35 mm inscribed circle and 2.38 mm thickness.
Swipe to compare both sizes →
| Property | CCGT 060202 ↗ | CCGT 060204 ↗ |
|---|---|---|
| Corner radiusDifferent | 0.2 mm | 0.4 mm |
| Inscribed circle | 6.35 mm | 6.35 mm |
| Thickness | 2.38 mm | 2.38 mm |
| Corner angle | 80 ° | 80 ° |
| Clearance angle | 7 ° | 7 ° |
| Family | CCGT | CCGT |
Before choosing this radius
This page includes both an aluminum-oriented carbide example and a steel/stainless cermet example. Choose the complete product, not just the base code.
From a size to an actual product
Documented product examples
The application belongs to the full product below. These examples are not a recommendation or a stock listing.
CCGT 060202-SF RTC+
Image match unverified- Item / entry
- 1771691
- Grade
- RTC+
- Edge material
- PVD-coated cermet
- Stated use
- Continuous finishing of steel and stainless steel
Does matching geometry mean I can swap these inserts?
No. Confirm the holder pocket, clamping, insert tolerances, cutting direction and complete product specification. Check grade, chipbreaker and application data for the actual workpiece and setup.
Read the base designation
CShape
CClearance
GTolerance
TConfiguration
06Size
02Thickness
02Radius
The code identifies a base geometry. Suffixes such as AS, SF, F, IC20, RTC+ or ID4 belong to a manufacturer’s product system.
Evidence, in context
Sources & review scope
Reviewed 2026-10-19. A checked field is not a product certification.
ISCAR · Aluminum Machining (opens in a new tab)
Printed page 17 / PDF page 19, CCGT-AS table
What this source supports
IC, thickness and radius for 060201-AS, 060202-AS and 060204-AS; IC20 grade and aluminum application. Catalogue edition not identified.
Rinaldi · CCGT-SF RTC+ (opens in a new tab)
Dimensions and item-number table
What this source supports
Dimensions and item numbers for 060202-SF RTC+ and 060204-SF RTC+; grade and stated application. Cutting-data rows are not used because the page repeats a size label.
Inch values are calculated from the listed millimetre values ÷ 25.4, rounded to four decimals. Product tolerances, compatibility and cutting performance require the applicable product specification.