Specification reference · product not verified
WCGW 08T308
Trigon · 7° clearance · WCGW series
No exact manufacturer product is documented for this specification. Confirm the holder pocket and clamping before choosing a replacement.
← Browse WCGW specificationsNominal code dimensions
Swipe to see the full dimension drawing →
| Field | mm | in | Code-table position |
|---|---|---|---|
| Inscribed circle | 12.7 | 0.5000 | 5 · ISCAR metric table ↗ |
| Thickness | 3.97 | 0.1563 | 6 · ISCAR metric table ↗ |
| Corner radius | 0.8 | 0.0315 | 7 · ISCAR metric table ↗ |
The inch column is mm ÷ 25.4, rounded to four decimal places. This is not an ANSI designation conversion. Product tolerances and clamping dimensions are not inferred.
WCGW 08T308 versus WCGW 060204
IC: 9.525 → 12.7 mm; thickness: 2.38 → 3.97 mm; radius: 0.4 → 0.8 mm. The nominal seat envelope changes; holder fit must be rechecked.
Swipe to compare both references →
| Property | WCGW 08T308 | WCGW 060204 |
|---|---|---|
| Family | WCGW | WCGW |
| Outline | Trigon | Trigon |
| Corner radius | 0.8 mm | 0.4 mm |
| Inscribed circle | 12.7 mm | 9.525 mm |
| Thickness | 3.97 mm | 2.38 mm |
| Corner angle | 80 ° | 80 ° |
| Clearance angle | 7 ° | 7 ° |
| Tolerance symbol | G | G |
| Configuration symbol | W | W |
| Evidence | Code table; product example not documented | Code table; product example not documented |
Where this radius sits
The WCGW 08T3 group in this directory has 1 entries, from 0.8 to 0.8 mm radius. This is the smallest listed radius in that group.
Confirm the part contour and tool compensation for 0.8 mm. A radius change does not establish surface finish, cutting data or holder compatibility.
Nearby WCGW references
- WCGW 060204 → — IC: 12.7 → 9.525 mm; thickness: 3.97 → 2.38 mm; radius: 0.8 → 0.4 mm. The nominal seat envelope changes; holder fit must be rechecked.
- WCGW 040202 → — IC: 12.7 → 6.35 mm; thickness: 3.97 → 2.38 mm; radius: 0.8 → 0.2 mm. The nominal seat envelope changes; holder fit must be rechecked.
- WCGW 030202 → — IC: 12.7 → 5.56 mm; thickness: 3.97 → 2.38 mm; radius: 0.8 → 0.2 mm. The nominal seat envelope changes; holder fit must be rechecked.
Product evidence for WCGW 08T308
No exact product row is attached to WCGW 08T308. The WCGW code and 08T308 digits describe nominal geometry; they do not prove that a product is manufactured or available.
Read shared WCGW configuration and selection limits →Calculate speed or feed after obtaining cutting data →
Source and limits
ISCAR · Metric insert identification ↗ · Single-sheet PDF, sections 1, 2, 4, 5, 6 and 7; visually checked 2026-10-20.
Shape, clearance, configuration and nominal code tables only. No grade, usable-edge count, catalogue availability or acceptance tolerances inferred. Values labeled “code table” are interpretations of a designation, not measurements of a delivered product. Product-row values are reported separately, including differences in printed precision.