Specification reference · product not verified
WCGT 08T312
Trigon · 7° clearance · WCGT series
No exact manufacturer product is documented for this specification. Confirm the holder pocket and clamping before choosing a replacement.
← Browse WCGT specificationsNominal code dimensions
Swipe to see the full dimension drawing →
| Field | mm | in | Code-table position |
|---|---|---|---|
| Inscribed circle | 12.7 | 0.5000 | 5 · ISCAR metric table ↗ |
| Thickness | 3.97 | 0.1563 | 6 · ISCAR metric table ↗ |
| Corner radius | 1.2 | 0.0472 | 7 · ISCAR metric table ↗ |
The inch column is mm ÷ 25.4, rounded to four decimal places. This is not an ANSI designation conversion. Product tolerances and clamping dimensions are not inferred.
WCGT 08T312 versus WCGT 08T308
radius: 0.8 → 1.2 mm. The nominal IC and thickness are unchanged.
Swipe to compare both references →
| Property | WCGT 08T312 | WCGT 08T308 |
|---|---|---|
| Family | WCGT | WCGT |
| Outline | Trigon | Trigon |
| Corner radius | 1.2 mm | 0.8 mm |
| Inscribed circle | 12.7 mm | 12.7 mm |
| Thickness | 3.97 mm | 3.97 mm |
| Corner angle | 80 ° | 80 ° |
| Clearance angle | 7 ° | 7 ° |
| Tolerance symbol | G | G |
| Configuration symbol | T | T |
| Evidence | Code table; product example not documented | Code table; product example not documented |
Where this radius sits
The WCGT 08T3 group in this directory has 3 entries, from 0.4 to 1.2 mm radius. This is the largest listed radius in that group.
Confirm the part contour and tool compensation for 1.2 mm. A radius change does not establish surface finish, cutting data or holder compatibility.
Nearby WCGT references
- WCGT 08T308 → — radius: 1.2 → 0.8 mm. The nominal IC and thickness are unchanged.
- WCGT 08T304 → — radius: 1.2 → 0.4 mm. The nominal IC and thickness are unchanged.
- WCGT 060208 → — IC: 12.7 → 9.525 mm; thickness: 3.97 → 2.38 mm; radius: 1.2 → 0.8 mm. The nominal seat envelope changes; holder fit must be rechecked.
Product evidence for WCGT 08T312
No exact product row is attached to WCGT 08T312. The WCGT code and 08T312 digits describe nominal geometry; they do not prove that a product is manufactured or available.
Read shared WCGT configuration and selection limits →Calculate speed or feed after obtaining cutting data →
Source and limits
ISCAR · Metric insert identification ↗ · Single-sheet PDF, sections 1, 2, 4, 5, 6 and 7; visually checked 2026-10-20.
Shape, clearance, configuration and nominal code tables only. No grade, usable-edge count, catalogue availability or acceptance tolerances inferred. Values labeled “code table” are interpretations of a designation, not measurements of a delivered product. Product-row values are reported separately, including differences in printed precision.