Specification reference · product not verified
VCGW 110304
35° rhombic · 7° clearance · VCGW series
No exact manufacturer product is documented for this specification. Confirm the holder pocket and clamping before choosing a replacement.
← Browse VCGW specificationsNominal code dimensions
Swipe to see the full dimension drawing →
| Field | mm | in | Code-table position |
|---|---|---|---|
| Inscribed circle | 6.35 | 0.2500 | 5 · ISCAR metric table ↗ |
| Thickness | 3.18 | 0.1252 | 6 · ISCAR metric table ↗ |
| Corner radius | 0.4 | 0.0157 | 7 · ISCAR metric table ↗ |
The inch column is mm ÷ 25.4, rounded to four decimal places. This is not an ANSI designation conversion. Product tolerances and clamping dimensions are not inferred.
VCGW 110304 versus VCGW 110302
radius: 0.2 → 0.4 mm. The nominal IC and thickness are unchanged.
Swipe to compare both references →
| Property | VCGW 110304 | VCGW 110302 |
|---|---|---|
| Family | VCGW | VCGW |
| Outline | 35° rhombic | 35° rhombic |
| Corner radius | 0.4 mm | 0.2 mm |
| Inscribed circle | 6.35 mm | 6.35 mm |
| Thickness | 3.18 mm | 3.18 mm |
| Corner angle | 35 ° | 35 ° |
| Clearance angle | 7 ° | 7 ° |
| Tolerance symbol | G | G |
| Configuration symbol | W | W |
| Evidence | Code table; product example not documented | Code table; product example not documented |
Where this radius sits
The VCGW 1103 group in this directory has 2 entries, from 0.2 to 0.4 mm radius. This is the largest listed radius in that group.
Confirm the part contour and tool compensation for 0.4 mm. A radius change does not establish surface finish, cutting data or holder compatibility.
Nearby VCGW references
- VCGW 110302 → — radius: 0.4 → 0.2 mm. The nominal IC and thickness are unchanged.
- VCGW 160404 → — IC: 6.35 → 9.525 mm; thickness: 3.18 → 4.76 mm. The nominal seat envelope changes; holder fit must be rechecked.
- VCGW 160408 → — IC: 6.35 → 9.525 mm; thickness: 3.18 → 4.76 mm; radius: 0.4 → 0.8 mm. The nominal seat envelope changes; holder fit must be rechecked.
Product evidence for VCGW 110304
No exact product row is attached to VCGW 110304. The VCGW code and 110304 digits describe nominal geometry; they do not prove that a product is manufactured or available.
Read shared VCGW configuration and selection limits →Calculate speed or feed after obtaining cutting data →
Source and limits
ISCAR · Metric insert identification ↗ · Single-sheet PDF, sections 1, 2, 4, 5, 6 and 7; visually checked 2026-10-20.
Shape, clearance, configuration and nominal code tables only. No grade, usable-edge count, catalogue availability or acceptance tolerances inferred. Values labeled “code table” are interpretations of a designation, not measurements of a delivered product. Product-row values are reported separately, including differences in printed precision.