Specification reference · product not verified
TNMG 060202
Triangular · 0° clearance · TNMG series
No exact manufacturer product is documented for this specification. Confirm the holder pocket and clamping before choosing a replacement.
← Browse TNMG specificationsNominal code dimensions
Swipe to see the full dimension drawing →
| Field | mm | in | Code-table position |
|---|---|---|---|
| Inscribed circle | 3.97 | 0.1563 | 5 · ISCAR metric table ↗ |
| Thickness | 2.38 | 0.0937 | 6 · ISCAR metric table ↗ |
| Corner radius | 0.2 | 0.0079 | 7 · ISCAR metric table ↗ |
The inch column is mm ÷ 25.4, rounded to four decimal places. This is not an ANSI designation conversion. Product tolerances and clamping dimensions are not inferred.
TNMG 060202 versus TNMG 060201
radius: 0.1 → 0.2 mm. The nominal IC and thickness are unchanged.
Swipe to compare both references →
| Property | TNMG 060202 | TNMG 060201 |
|---|---|---|
| Family | TNMG | TNMG |
| Outline | Triangular | Triangular |
| Corner radius | 0.2 mm | 0.1 mm |
| Inscribed circle | 3.97 mm | 3.97 mm |
| Thickness | 2.38 mm | 2.38 mm |
| Corner angle | 60 ° | 60 ° |
| Clearance angle | 0 ° | 0 ° |
| Tolerance symbol | M | M |
| Configuration symbol | G | G |
| Evidence | Code table; product example not documented | Code table; product example not documented |
Where this radius sits
The TNMG 0602 group in this directory has 3 entries, from 0.1 to 0.4 mm radius. This sits between the smallest and largest listed radii.
Confirm the part contour and tool compensation for 0.2 mm. A radius change does not establish surface finish, cutting data or holder compatibility.
Nearby TNMG references
- TNMG 060201 → — radius: 0.2 → 0.1 mm. The nominal IC and thickness are unchanged.
- TNMG 060204 → — radius: 0.2 → 0.4 mm. The nominal IC and thickness are unchanged.
- TNMG 090202 → — IC: 3.97 → 5.56 mm. The nominal seat envelope changes; holder fit must be rechecked.
Product evidence for TNMG 060202
No exact product row is attached to TNMG 060202. The TNMG code and 060202 digits describe nominal geometry; they do not prove that a product is manufactured or available.
Read shared TNMG configuration and selection limits →Calculate speed or feed after obtaining cutting data →
Source and limits
ISCAR · Metric insert identification ↗ · Single-sheet PDF, sections 1, 2, 4, 5, 6 and 7; visually checked 2026-10-20.
Shape, clearance, configuration and nominal code tables only. No grade, usable-edge count, catalogue availability or acceptance tolerances inferred. Values labeled “code table” are interpretations of a designation, not measurements of a delivered product. Product-row values are reported separately, including differences in printed precision.