Specification reference · product not verified
TNMA 090208
Triangular · 0° clearance · TNMA series
No exact manufacturer product is documented for this specification. Confirm the holder pocket and clamping before choosing a replacement.
← Browse TNMA specificationsNominal code dimensions
Swipe to see the full dimension drawing →
| Field | mm | in | Code-table position |
|---|---|---|---|
| Inscribed circle | 5.56 | 0.2189 | 5 · ISCAR metric table ↗ |
| Thickness | 2.38 | 0.0937 | 6 · ISCAR metric table ↗ |
| Corner radius | 0.8 | 0.0315 | 7 · ISCAR metric table ↗ |
The inch column is mm ÷ 25.4, rounded to four decimal places. This is not an ANSI designation conversion. Product tolerances and clamping dimensions are not inferred.
TNMA 090208 versus TNMA 090204
radius: 0.4 → 0.8 mm. The nominal IC and thickness are unchanged.
Swipe to compare both references →
| Property | TNMA 090208 | TNMA 090204 |
|---|---|---|
| Family | TNMA | TNMA |
| Outline | Triangular | Triangular |
| Corner radius | 0.8 mm | 0.4 mm |
| Inscribed circle | 5.56 mm | 5.56 mm |
| Thickness | 2.38 mm | 2.38 mm |
| Corner angle | 60 ° | 60 ° |
| Clearance angle | 0 ° | 0 ° |
| Tolerance symbol | M | M |
| Configuration symbol | A | A |
| Evidence | Code table; product example not documented | Code table; product example not documented |
Where this radius sits
The TNMA 0902 group in this directory has 4 entries, from 0.1 to 0.8 mm radius. This is the largest listed radius in that group.
Confirm the part contour and tool compensation for 0.8 mm. A radius change does not establish surface finish, cutting data or holder compatibility.
Nearby TNMA references
- TNMA 090204 → — radius: 0.8 → 0.4 mm. The nominal IC and thickness are unchanged.
- TNMA 090202 → — radius: 0.8 → 0.2 mm. The nominal IC and thickness are unchanged.
- TNMA 090201 → — radius: 0.8 → 0.1 mm. The nominal IC and thickness are unchanged.
Product evidence for TNMA 090208
No exact product row is attached to TNMA 090208. The TNMA code and 090208 digits describe nominal geometry; they do not prove that a product is manufactured or available.
Read shared TNMA configuration and selection limits →Calculate speed or feed after obtaining cutting data →
Source and limits
ISCAR · Metric insert identification ↗ · Single-sheet PDF, sections 1, 2, 4, 5, 6 and 7; visually checked 2026-10-20.
Shape, clearance, configuration and nominal code tables only. No grade, usable-edge count, catalogue availability or acceptance tolerances inferred. Values labeled “code table” are interpretations of a designation, not measurements of a delivered product. Product-row values are reported separately, including differences in printed precision.