Specification reference · product not verified
SCGT 150612
Square · 7° clearance · SCGT series
No exact manufacturer product is documented for this specification. Confirm the holder pocket and clamping before choosing a replacement.
← Browse SCGT specificationsNominal code dimensions
Swipe to see the full dimension drawing →
| Field | mm | in | Code-table position |
|---|---|---|---|
| Inscribed circle | 15.875 | 0.6250 | 5 · ISCAR metric table ↗ |
| Thickness | 6.35 | 0.2500 | 6 · ISCAR metric table ↗ |
| Corner radius | 1.2 | 0.0472 | 7 · ISCAR metric table ↗ |
The inch column is mm ÷ 25.4, rounded to four decimal places. This is not an ANSI designation conversion. Product tolerances and clamping dimensions are not inferred.
SCGT 150612 versus SCGT 150608
radius: 0.8 → 1.2 mm. The nominal IC and thickness are unchanged.
Swipe to compare both references →
| Property | SCGT 150612 | SCGT 150608 |
|---|---|---|
| Family | SCGT | SCGT |
| Outline | Square | Square |
| Corner radius | 1.2 mm | 0.8 mm |
| Inscribed circle | 15.875 mm | 15.875 mm |
| Thickness | 6.35 mm | 6.35 mm |
| Corner angle | 90 ° | 90 ° |
| Clearance angle | 7 ° | 7 ° |
| Tolerance symbol | G | G |
| Configuration symbol | T | T |
| Evidence | Code table; product example not documented | Code table; product example not documented |
Where this radius sits
The SCGT 1506 group in this directory has 5 entries, from 0.4 to 2.4 mm radius. This sits between the smallest and largest listed radii.
Confirm the part contour and tool compensation for 1.2 mm. A radius change does not establish surface finish, cutting data or holder compatibility.
Nearby SCGT references
- SCGT 150608 → — radius: 1.2 → 0.8 mm. The nominal IC and thickness are unchanged.
- SCGT 150616 → — radius: 1.2 → 1.6 mm. The nominal IC and thickness are unchanged.
- SCGT 150604 → — radius: 1.2 → 0.4 mm. The nominal IC and thickness are unchanged.
Product evidence for SCGT 150612
No exact product row is attached to SCGT 150612. The SCGT code and 150612 digits describe nominal geometry; they do not prove that a product is manufactured or available.
Read shared SCGT configuration and selection limits →Calculate speed or feed after obtaining cutting data →
Source and limits
ISCAR · Metric insert identification ↗ · Single-sheet PDF, sections 1, 2, 4, 5, 6 and 7; visually checked 2026-10-20.
Shape, clearance, configuration and nominal code tables only. No grade, usable-edge count, catalogue availability or acceptance tolerances inferred. Values labeled “code table” are interpretations of a designation, not measurements of a delivered product. Product-row values are reported separately, including differences in printed precision.