Cutting tools / Series index
RCGT insert specifications
Round · 7° clearance. Partly cylindrical hole with a single-side countersink; chipbreaker on one face.
Manufacturer product information has not yet been documented for these specifications.
Check these markings
Swipe for dimensions and evidence →
| Designation | IC mm | Thickness mm | Radius mm | Evidence |
|---|---|---|---|---|
| RCGT 060202 → | — | — | — | Round-code conflict |
| RCGT 060204 → | — | — | — | Round-code conflict |
| RCGT 060208 → | — | — | — | Round-code conflict |
| RCGT 070202 → | — | — | — | Round-code conflict |
| RCGT 070204 → | — | — | — | Round-code conflict |
| RCGT 070208 → | — | — | — | Round-code conflict |
| RCGT 09T304 → | — | — | — | Round-code conflict |
| RCGT 09T308 → | — | — | — | Round-code conflict |
| RCGT 09T312 → | — | — | — | Round-code conflict |
| RCGT 120404 → | — | — | — | Round-code conflict |
| RCGT 120408 → | — | — | — | Round-code conflict |
| RCGT 120412 → | — | — | — | Round-code conflict |
| RCGT 120416 → | — | — | — | Round-code conflict |
| RCGT 120424 → | — | — | — | Round-code conflict |
| RCGT 150608 → | — | — | — | Round-code conflict |
| RCGT 150612 → | — | — | — | Round-code conflict |
| RCGT 150616 → | — | — | — | Round-code conflict |
| RCGT 150624 → | — | — | — | Round-code conflict |
| RCGT 190608 → | — | — | — | Round-code conflict |
| RCGT 190612 → | — | — | — | Round-code conflict |
| RCGT 190616 → | — | — | — | Round-code conflict |
| RCGT 190624 → | — | — | — | Round-code conflict |
| RCGT 250712 → | — | — | — | Round-code conflict |
| RCGT 250716 → | — | — | — | Round-code conflict |
| RCGT 250724 → | — | — | — | Round-code conflict |
Understand RCGT geometry and selection limits
What distinguishes RCGT
Base configuration
Partly cylindrical hole with a single-side countersink; chipbreaker on one face.
Tolerance symbol G identifies a class. Use the applicable product drawing for acceptance limits.
Resolve the round-insert code first
The 25 inherited RCGT entries end in ordinary corner-radius digits. ISCAR’s round-insert convention uses M0 or 00 in that position. The old “360° nose angle”, fixed corner count and separate corner-radius answers are not carried into this edition.
Read the full marking, including M0/00 and any maker-specific suffix. Obtain diameter, thickness, seating and permitted indexing from the manufacturer drawing. We do not silently replace a questioned code with a similarly spelled product.
Check the round-code footnote in section 7 ↗Source and limits
ISCAR · Metric insert identification ↗ · Single-sheet PDF, sections 1, 2, 4, 5, 6 and 7; visually checked 2026-10-20.
Shape, clearance, configuration and nominal code tables only. No grade, usable-edge count, catalogue availability or acceptance tolerances inferred. Values labeled “code table” are interpretations of a designation, not measurements of a delivered product. Product-row values are reported separately, including differences in printed precision.