Specification reference · product not verified
DCGW 150404
55° rhombic · 7° clearance · DCGW series
No exact manufacturer product is documented for this specification. Confirm the holder pocket and clamping before choosing a replacement.
← Browse DCGW specificationsNominal code dimensions
Swipe to see the full dimension drawing →
| Field | mm | in | Code-table position |
|---|---|---|---|
| Inscribed circle | 12.7 | 0.5000 | 5 · ISCAR metric table ↗ |
| Thickness | 4.76 | 0.1874 | 6 · ISCAR metric table ↗ |
| Corner radius | 0.4 | 0.0157 | 7 · ISCAR metric table ↗ |
The inch column is mm ÷ 25.4, rounded to four decimal places. This is not an ANSI designation conversion. Product tolerances and clamping dimensions are not inferred.
DCGW 150404 versus DCGW 150408
radius: 0.8 → 0.4 mm. The nominal IC and thickness are unchanged.
Swipe to compare both references →
| Property | DCGW 150404 | DCGW 150408 |
|---|---|---|
| Family | DCGW | DCGW |
| Outline | 55° rhombic | 55° rhombic |
| Corner radius | 0.4 mm | 0.8 mm |
| Inscribed circle | 12.7 mm | 12.7 mm |
| Thickness | 4.76 mm | 4.76 mm |
| Corner angle | 55 ° | 55 ° |
| Clearance angle | 7 ° | 7 ° |
| Tolerance symbol | G | G |
| Configuration symbol | W | W |
| Evidence | Code table; product example not documented | Code table; product example not documented |
Where this radius sits
The DCGW 1504 group in this directory has 2 entries, from 0.4 to 0.8 mm radius. This is the smallest listed radius in that group.
Confirm the part contour and tool compensation for 0.4 mm. A radius change does not establish surface finish, cutting data or holder compatibility.
Nearby DCGW references
- DCGW 150408 → — radius: 0.4 → 0.8 mm. The nominal IC and thickness are unchanged.
- DCGW 11T304 → — IC: 12.7 → 9.525 mm; thickness: 4.76 → 3.97 mm. The nominal seat envelope changes; holder fit must be rechecked.
- DCGW 11T308 → — IC: 12.7 → 9.525 mm; thickness: 4.76 → 3.97 mm; radius: 0.4 → 0.8 mm. The nominal seat envelope changes; holder fit must be rechecked.
Product evidence for DCGW 150404
No exact product row is attached to DCGW 150404. The DCGW code and 150404 digits describe nominal geometry; they do not prove that a product is manufactured or available.
Read shared DCGW configuration and selection limits →Calculate speed or feed after obtaining cutting data →
Source and limits
ISCAR · Metric insert identification ↗ · Single-sheet PDF, sections 1, 2, 4, 5, 6 and 7; visually checked 2026-10-20.
Shape, clearance, configuration and nominal code tables only. No grade, usable-edge count, catalogue availability or acceptance tolerances inferred. Values labeled “code table” are interpretations of a designation, not measurements of a delivered product. Product-row values are reported separately, including differences in printed precision.