Specification reference · product not verified
CPMT 09T302
80° rhombic · 11° clearance · CPMT series
No exact manufacturer product is documented for this specification. Confirm the holder pocket and clamping before choosing a replacement.
← Browse CPMT specificationsNominal code dimensions
Swipe to see the full dimension drawing →
| Field | mm | in | Code-table position |
|---|---|---|---|
| Inscribed circle | 9.525 | 0.3750 | 5 · ISCAR metric table ↗ |
| Thickness | 3.97 | 0.1563 | 6 · ISCAR metric table ↗ |
| Corner radius | 0.2 | 0.0079 | 7 · ISCAR metric table ↗ |
The inch column is mm ÷ 25.4, rounded to four decimal places. This is not an ANSI designation conversion. Product tolerances and clamping dimensions are not inferred.
CPMT 09T302 versus CPMT 09T304
radius: 0.4 → 0.2 mm. The nominal IC and thickness are unchanged.
Swipe to compare both references →
| Property | CPMT 09T302 | CPMT 09T304 |
|---|---|---|
| Family | CPMT | CPMT |
| Outline | 80° rhombic | 80° rhombic |
| Corner radius | 0.2 mm | 0.4 mm |
| Inscribed circle | 9.525 mm | 9.525 mm |
| Thickness | 3.97 mm | 3.97 mm |
| Corner angle | 80 ° | 80 ° |
| Clearance angle | 11 ° | 11 ° |
| Tolerance symbol | M | M |
| Configuration symbol | T | T |
| Evidence | Code table; product example not documented | Code table; product example not documented |
Where this radius sits
The CPMT 09T3 group in this directory has 4 entries, from 0.2 to 1.2 mm radius. This is the smallest listed radius in that group.
Confirm the part contour and tool compensation for 0.2 mm. A radius change does not establish surface finish, cutting data or holder compatibility.
Nearby CPMT references
- CPMT 09T304 → — radius: 0.2 → 0.4 mm. The nominal IC and thickness are unchanged.
- CPMT 09T308 → — radius: 0.2 → 0.8 mm. The nominal IC and thickness are unchanged.
- CPMT 09T312 → — radius: 0.2 → 1.2 mm. The nominal IC and thickness are unchanged.
Product evidence for CPMT 09T302
No exact product row is attached to CPMT 09T302. The CPMT code and 09T302 digits describe nominal geometry; they do not prove that a product is manufactured or available.
Read shared CPMT configuration and selection limits →Calculate speed or feed after obtaining cutting data →
Source and limits
ISCAR · Metric insert identification ↗ · Single-sheet PDF, sections 1, 2, 4, 5, 6 and 7; visually checked 2026-10-20.
Shape, clearance, configuration and nominal code tables only. No grade, usable-edge count, catalogue availability or acceptance tolerances inferred. Values labeled “code table” are interpretations of a designation, not measurements of a delivered product. Product-row values are reported separately, including differences in printed precision.