Specification reference · product not verified
CNMG 250732
80° rhombic · 0° clearance · CNMG series
No exact manufacturer product is documented for this specification. Confirm the holder pocket and clamping before choosing a replacement.
← Browse CNMG specificationsNominal code dimensions
Swipe to see the full dimension drawing →
| Field | mm | in | Code-table position |
|---|---|---|---|
| Inscribed circle | 25.4 | 1.0000 | 5 · ISCAR metric table ↗ |
| Thickness | 7.94 | 0.3126 | 6 · ISCAR metric table ↗ |
| Corner radius | 3.2 | 0.1260 | 7 · ISCAR metric table ↗ |
The inch column is mm ÷ 25.4, rounded to four decimal places. This is not an ANSI designation conversion. Product tolerances and clamping dimensions are not inferred.
CNMG 250732 versus CNMG 250724
radius: 2.4 → 3.2 mm. The nominal IC and thickness are unchanged.
Swipe to compare both references →
| Property | CNMG 250732 | CNMG 250724 |
|---|---|---|
| Family | CNMG | CNMG |
| Outline | 80° rhombic | 80° rhombic |
| Corner radius | 3.2 mm | 2.4 mm |
| Inscribed circle | 25.4 mm | 25.4 mm |
| Thickness | 7.94 mm | 7.94 mm |
| Corner angle | 80 ° | 80 ° |
| Clearance angle | 0 ° | 0 ° |
| Tolerance symbol | M | M |
| Configuration symbol | G | G |
| Evidence | Code table; product example not documented | Code table; product example not documented |
Where this radius sits
The CNMG 2507 group in this directory has 4 entries, from 1.2 to 3.2 mm radius. This is the largest listed radius in that group.
Confirm the part contour and tool compensation for 3.2 mm. A radius change does not establish surface finish, cutting data or holder compatibility.
Nearby CNMG references
- CNMG 250724 → — radius: 3.2 → 2.4 mm. The nominal IC and thickness are unchanged.
- CNMG 250716 → — radius: 3.2 → 1.6 mm. The nominal IC and thickness are unchanged.
- CNMG 250712 → — radius: 3.2 → 1.2 mm. The nominal IC and thickness are unchanged.
Product evidence for CNMG 250732
No exact product row is attached to CNMG 250732. The CNMG code and 250732 digits describe nominal geometry; they do not prove that a product is manufactured or available.
Read shared CNMG configuration and selection limits →Calculate speed or feed after obtaining cutting data →
Source and limits
ISCAR · Metric insert identification ↗ · Single-sheet PDF, sections 1, 2, 4, 5, 6 and 7; visually checked 2026-10-20.
Shape, clearance, configuration and nominal code tables only. No grade, usable-edge count, catalogue availability or acceptance tolerances inferred. Values labeled “code table” are interpretations of a designation, not measurements of a delivered product. Product-row values are reported separately, including differences in printed precision.