Specification reference · product not verified
CCMT 190624
80° rhombic · 7° clearance · CCMT series
No exact manufacturer product is documented for this specification. Confirm the holder pocket and clamping before choosing a replacement.
← Browse CCMT specificationsNominal code dimensions
Swipe to see the full dimension drawing →
| Field | mm | in | Code-table position |
|---|---|---|---|
| Inscribed circle | 19.05 | 0.7500 | 5 · ISCAR metric table ↗ |
| Thickness | 6.35 | 0.2500 | 6 · ISCAR metric table ↗ |
| Corner radius | 2.4 | 0.0945 | 7 · ISCAR metric table ↗ |
The inch column is mm ÷ 25.4, rounded to four decimal places. This is not an ANSI designation conversion. Product tolerances and clamping dimensions are not inferred.
CCMT 190624 versus CCMT 190616
radius: 1.6 → 2.4 mm. The nominal IC and thickness are unchanged.
Swipe to compare both references →
| Property | CCMT 190624 | CCMT 190616 |
|---|---|---|
| Family | CCMT | CCMT |
| Outline | 80° rhombic | 80° rhombic |
| Corner radius | 2.4 mm | 1.6 mm |
| Inscribed circle | 19.05 mm | 19.05 mm |
| Thickness | 6.35 mm | 6.35 mm |
| Corner angle | 80 ° | 80 ° |
| Clearance angle | 7 ° | 7 ° |
| Tolerance symbol | M | M |
| Configuration symbol | T | T |
| Evidence | Code table; product example not documented | Code table; product example not documented |
Where this radius sits
The CCMT 1906 group in this directory has 4 entries, from 0.8 to 2.4 mm radius. This is the largest listed radius in that group.
Confirm the part contour and tool compensation for 2.4 mm. A radius change does not establish surface finish, cutting data or holder compatibility.
Nearby CCMT references
- CCMT 190616 → — radius: 2.4 → 1.6 mm. The nominal IC and thickness are unchanged.
- CCMT 190612 → — radius: 2.4 → 1.2 mm. The nominal IC and thickness are unchanged.
- CCMT 190608 → — radius: 2.4 → 0.8 mm. The nominal IC and thickness are unchanged.
Product evidence for CCMT 190624
No exact product row is attached to CCMT 190624. The CCMT code and 190624 digits describe nominal geometry; they do not prove that a product is manufactured or available.
Read shared CCMT configuration and selection limits →Calculate speed or feed after obtaining cutting data →
Source and limits
ISCAR · Metric insert identification ↗ · Single-sheet PDF, sections 1, 2, 4, 5, 6 and 7; visually checked 2026-10-20.
Shape, clearance, configuration and nominal code tables only. No grade, usable-edge count, catalogue availability or acceptance tolerances inferred. Values labeled “code table” are interpretations of a designation, not measurements of a delivered product. Product-row values are reported separately, including differences in printed precision.