Specification reference · product not verified
CCGW 09T308
80° rhombic · 7° clearance · CCGW series
No exact manufacturer product is documented for this specification. Confirm the holder pocket and clamping before choosing a replacement.
← Browse CCGW specificationsNominal code dimensions
Swipe to see the full dimension drawing →
| Field | mm | in | Code-table position |
|---|---|---|---|
| Inscribed circle | 9.525 | 0.3750 | 5 · ISCAR metric table ↗ |
| Thickness | 3.97 | 0.1563 | 6 · ISCAR metric table ↗ |
| Corner radius | 0.8 | 0.0315 | 7 · ISCAR metric table ↗ |
The inch column is mm ÷ 25.4, rounded to four decimal places. This is not an ANSI designation conversion. Product tolerances and clamping dimensions are not inferred.
CCGW 09T308 versus CCGW 09T304
radius: 0.4 → 0.8 mm. The nominal IC and thickness are unchanged.
Swipe to compare both references →
| Property | CCGW 09T308 | CCGW 09T304 |
|---|---|---|
| Family | CCGW | CCGW |
| Outline | 80° rhombic | 80° rhombic |
| Corner radius | 0.8 mm | 0.4 mm |
| Inscribed circle | 9.525 mm | 9.525 mm |
| Thickness | 3.97 mm | 3.97 mm |
| Corner angle | 80 ° | 80 ° |
| Clearance angle | 7 ° | 7 ° |
| Tolerance symbol | G | G |
| Configuration symbol | W | W |
| Evidence | Code table; product example not documented | Code table; product example not documented |
Where this radius sits
The CCGW 09T3 group in this directory has 2 entries, from 0.4 to 0.8 mm radius. This is the largest listed radius in that group.
Confirm the part contour and tool compensation for 0.8 mm. A radius change does not establish surface finish, cutting data or holder compatibility.
Nearby CCGW references
- CCGW 09T304 → — radius: 0.8 → 0.4 mm. The nominal IC and thickness are unchanged.
- CCGW 120408 → — IC: 9.525 → 12.7 mm; thickness: 3.97 → 4.76 mm. The nominal seat envelope changes; holder fit must be rechecked.
- CCGW 120404 → — IC: 9.525 → 12.7 mm; thickness: 3.97 → 4.76 mm; radius: 0.8 → 0.4 mm. The nominal seat envelope changes; holder fit must be rechecked.
Product evidence for CCGW 09T308
No exact product row is attached to CCGW 09T308. The CCGW code and 09T308 digits describe nominal geometry; they do not prove that a product is manufactured or available.
Read shared CCGW configuration and selection limits →Calculate speed or feed after obtaining cutting data →
Source and limits
ISCAR · Metric insert identification ↗ · Single-sheet PDF, sections 1, 2, 4, 5, 6 and 7; visually checked 2026-10-20.
Shape, clearance, configuration and nominal code tables only. No grade, usable-edge count, catalogue availability or acceptance tolerances inferred. Values labeled “code table” are interpretations of a designation, not measurements of a delivered product. Product-row values are reported separately, including differences in printed precision.