Specification reference · product not verified
CCGT 160508
80° rhombic · 7° clearance · CCGT series
No exact manufacturer product is documented for this specification. Confirm the holder pocket and clamping before choosing a replacement.
← Browse CCGT specificationsNominal code dimensions
Swipe to see the full dimension drawing →
| Field | mm | in | Code-table position |
|---|---|---|---|
| Inscribed circle | 15.875 | 0.6250 | 5 · ISCAR metric table ↗ |
| Thickness | 5.56 | 0.2189 | 6 · ISCAR metric table ↗ |
| Corner radius | 0.8 | 0.0315 | 7 · ISCAR metric table ↗ |
The inch column is mm ÷ 25.4, rounded to four decimal places. This is not an ANSI designation conversion. Product tolerances and clamping dimensions are not inferred.
CCGT 160508 versus CCGT 160512
radius: 1.2 → 0.8 mm. The nominal IC and thickness are unchanged.
Swipe to compare both references →
| Property | CCGT 160508 | CCGT 160512 |
|---|---|---|
| Family | CCGT | CCGT |
| Outline | 80° rhombic | 80° rhombic |
| Corner radius | 0.8 mm | 1.2 mm |
| Inscribed circle | 15.875 mm | 15.875 mm |
| Thickness | 5.56 mm | 5.56 mm |
| Corner angle | 80 ° | 80 ° |
| Clearance angle | 7 ° | 7 ° |
| Tolerance symbol | G | G |
| Configuration symbol | T | T |
| Evidence | Code table; product example not documented | Code table; product example not documented |
Where this radius sits
The CCGT 1605 group in this directory has 3 entries, from 0.8 to 1.6 mm radius. This is the smallest listed radius in that group.
Confirm the part contour and tool compensation for 0.8 mm. A radius change does not establish surface finish, cutting data or holder compatibility.
Nearby CCGT references
- CCGT 160512 → — radius: 0.8 → 1.2 mm. The nominal IC and thickness are unchanged.
- CCGT 160516 → — radius: 0.8 → 1.6 mm. The nominal IC and thickness are unchanged.
- CCGT 160608 → — thickness: 5.56 → 6.35 mm. The nominal seat envelope changes; holder fit must be rechecked.
Product evidence for CCGT 160508
No exact product row is attached to CCGT 160508. The CCGT code and 160508 digits describe nominal geometry; they do not prove that a product is manufactured or available.
Read shared CCGT configuration and selection limits →Calculate speed or feed after obtaining cutting data →
Source and limits
ISCAR · Metric insert identification ↗ · Single-sheet PDF, sections 1, 2, 4, 5, 6 and 7; visually checked 2026-10-20.
Shape, clearance, configuration and nominal code tables only. No grade, usable-edge count, catalogue availability or acceptance tolerances inferred. Values labeled “code table” are interpretations of a designation, not measurements of a delivered product. Product-row values are reported separately, including differences in printed precision.