Threads / Size reference

#4-48 UNF

#4-48 has a nominal outside diameter of 2.8448 mm and a 0.529167 mm pitch.

Nominal major diameter0.112 in

2.8448 mm

Threads per inch48 TPI

0.529167 mm pitch

Check tap-drill options →Compare #4-40 →

Nominal dimensions; no class allowances or acceptance limits applied. The # prefix denotes a numbered screw, not millimetres.

#4-48 · PITCH VIEWSCHEMATIC

same diameter comparison

#4-48 vs #4-40

#4-40 UNC shares the nominal diameter but has a 0.635000 mm pitch. The pitch difference is 0.105833 mm; these are different nominal threads.

Swipe to compare both sizes →

Nominal size comparison
Property	#4-48 UNF	#4-40 UNC
Nominal diameter · in	0.112	0.112
Nominal diameter · mm	2.8448	2.8448
Threads per inchDifferent	48	40
Pitch · mmDifferent	0.529167	0.635

Browse UNF →

Source chart available

Cutting-tap drill references

Cut taps · Guhring chart · PDF page 2
Target theoretical thread	Listed drill	Diameter · in / mm
55%	2.45 mm	0.096457 / 2.45
65%	3/32 in	0.09375 / 2.38125
75%	2.32 mm	0.091339 / 2.32

Choose cut / form and target →

Need acceptance limits?

The complete class and applicable drawing requirements are needed. These nominal values are not maximum/minimum inspection limits.

Part has no marking?

Measure the correct diameter and pitch, then compare candidates across metric and inch systems.

Basis for this size

Nominal designation and family transcribed from the live directory on 2026-10-19; unit conversions are calculated using exactly 25.4 mm/in. The drill row was read from Guhring PDF page 2; numbered and letter drill diameters use page 1. Paid standard limit tables have not been reviewed.

ASME B1.1 · standard scope ↗ · Guhring · Tap Drill Sizes ↗ Full source scope →