Threads / Size reference
M30x3.5 Metric coarse
M30x3.5 has a nominal outside diameter of 30 mm and a 3.5 mm pitch.
1.181102 in
7.257143 TPI · calculated
Nominal dimensions; no class allowances or acceptance limits applied. M sizes state diameter and pitch in millimetres.
same diameter comparison
M30x3.5 vs M30x2
M30x2 Metric fine shares the nominal diameter but has a 2.000000 mm pitch. The pitch difference is 1.500000 mm; these are different nominal threads.
Swipe to compare both sizes →
| Property | M30x3.5 Metric coarse | M30x2 Metric fine |
|---|---|---|
| Nominal diameter · in | 1.181102 | 1.181102 |
| Nominal diameter · mm | 30 | 30 |
| Threads per inchDifferent | 7.257143 | 12.7 |
| Pitch · mmDifferent | 3.5 | 2 |
Tapping-hole evidence for M30x3.5
No reviewed chart row for M30x3.5 Metric coarse
You can calculate a theoretical hole with the cited equation. It is not a stocked-drill selection or a tool-specific hole range.
Need acceptance limits?
The complete class and applicable drawing requirements are needed. These nominal values are not maximum/minimum inspection limits.
Part has no marking?
Measure the correct diameter and pitch, then compare candidates across metric and inch systems.
Basis for this size
Nominal designation and family transcribed from the live directory on 2026-10-19; unit conversions are calculated using exactly 25.4 mm/in. No matching drill row has been reviewed for this exact size. Paid standard limit tables have not been reviewed.
ISO 261 · metric general plan ↗ · Guhring · Tap Drill Sizes ↗ Full source scope →