Cutting tools / Series index

VNMG insert specifications

35° rhombic · 0° clearance. Cylindrical fixing hole; chipbreakers on both faces in the base type.

1 of 10 listed specifications have manufacturer examples linked from their detail pages.

Filter & compare VNMG sizes →Identify from measurements →

Choose a VNMG specification

Swipe for dimensions and evidence →

Nominal dimensions interpreted from the code table, millimetres
Designation	IC mm	Thickness mm	Radius mm	Evidence
VNMG 110301 →	6.35	3.18	0.1	Specification only · product not verified
VNMG 110302 →	6.35	3.18	0.2	Specification only · product not verified
VNMG 110304 →	6.35	3.18	0.4	Specification only · product not verified
VNMG 110308 →	6.35	3.18	0.8	Specification only · product not verified
VNMG 160402 →	9.525	4.76	0.2	Specification only · product not verified
VNMG 160404 →	9.525	4.76	0.4	Specification only · product not verified
VNMG 160408 →	9.525	4.76	0.8	1 manufacturer examples
VNMG 160412 →	9.525	4.76	1.2	Specification only · product not verified
VNMG 160416 →	9.525	4.76	1.6	Specification only · product not verified
VNMG 160424 →	9.525	4.76	2.4	Specification only · product not verified

Understand VNMG geometry and selection limits

VNMGFamily structure

Cylindrical hole · 2-face chipbreaker in base type. Family proportions are illustrative; choose a specification for dimensions. Dashed circles are mounting symbols, not bore dimensions. Chipbreaker, edge preparation, tip construction and coating are not depicted. This is not a product photograph.

What distinguishes VNMG

Base configuration

Cylindrical fixing hole; chipbreakers on both faces in the base type.

Tolerance symbol M identifies a class. Use the applicable product drawing for acceptance limits.

Check the adjacent family

VBMT → · VCGT → · VCGW → · VCMT → · VNGA →

These families share the outline letter V. Differences in clearance, tolerance and mounting remain relevant even when IC matches.

Choose the comparison that matches your question

This family contains 2 size/thickness groups: 1103, 1604. Compare radii within one group first; moving between groups can change the insert-seat envelope.

Shape and clearance do not identify workpiece material, coating, grade or cutting data. Use an exact catalogue example when available; otherwise confirm a maker’s full designation before ordering.

Product evidence in this family

ISCAR / catalogue example

VNMG 160408-NF IC20

IC: 9.52 mm
Thickness: 4.76 mm
Radius: 0.8 mm
Grade: IC20

Read the exact catalogue row ↗

Aluminum Machining, PDF page 15 / printed page 13, exact designation row. Exact geometry row and IC20 availability mark in this catalogue. Cutting conditions require the applicable product data; no stock check.

Find all documented examples in this family →

Source and limits

ISCAR · Metric insert identification ↗ · Single-sheet PDF, sections 1, 2, 4, 5, 6 and 7; visually checked 2026-10-20.

Shape, clearance, configuration and nominal code tables only. No grade, usable-edge count, catalogue availability or acceptance tolerances inferred. Values labeled “code table” are interpretations of a designation, not measurements of a delivered product. Product-row values are reported separately, including differences in printed precision.

See the page-by-page review →