Cutting tools / Series index

DCMT insert specifications

55° rhombic · 7° clearance. Partly cylindrical hole with a single-side countersink; chipbreaker on one face.

2 of 18 listed specifications have manufacturer examples linked from their detail pages.

Filter & compare DCMT sizes →Identify from measurements →

Choose a DCMT specification

Swipe for dimensions and evidence →

Nominal dimensions interpreted from the code table, millimetres
Designation	IC mm	Thickness mm	Radius mm	Evidence
DCMT 070201 →	6.35	2.38	0.1	Specification only · product not verified
DCMT 070202 →	6.35	2.38	0.2	Specification only · product not verified
DCMT 070204 →	6.35	2.38	0.4	Specification only · product not verified
DCMT 11T302 →	9.525	3.97	0.2	Specification only · product not verified
DCMT 11T304 →	9.525	3.97	0.4	1 manufacturer examples
DCMT 11T308 →	9.525	3.97	0.8	1 manufacturer examples
DCMT 150404 →	12.7	4.76	0.4	Specification only · product not verified
DCMT 150408 →	12.7	4.76	0.8	Specification only · product not verified
DCMT 150412 →	12.7	4.76	1.2	Specification only · product not verified
DCMT 150416 →	12.7	4.76	1.6	Specification only · product not verified
DCMT 150604 →	12.7	6.35	0.4	Specification only · product not verified
DCMT 150608 →	12.7	6.35	0.8	Specification only · product not verified
DCMT 150612 →	12.7	6.35	1.2	Specification only · product not verified
DCMT 150616 →	12.7	6.35	1.6	Specification only · product not verified
DCMT 190608 →	15.875	6.35	0.8	Specification only · product not verified
DCMT 190612 →	15.875	6.35	1.2	Specification only · product not verified
DCMT 190616 →	15.875	6.35	1.6	Specification only · product not verified
DCMT 190624 →	15.875	6.35	2.4	Specification only · product not verified

Understand DCMT geometry and selection limits

DCMTFamily structure

Hole + one-face countersink · 1-face chipbreaker in base type. Family proportions are illustrative; choose a specification for dimensions. Dashed circles are mounting symbols, not bore dimensions. Chipbreaker, edge preparation, tip construction and coating are not depicted. This is not a product photograph.

What distinguishes DCMT

Base configuration

Partly cylindrical hole with a single-side countersink; chipbreaker on one face.

Tolerance symbol M identifies a class. Use the applicable product drawing for acceptance limits.

Check the adjacent family

DCGT → · DCGW → · DNGA → · DNGN → · DNMA → · DNMG →

These families share the outline letter D. Differences in clearance, tolerance and mounting remain relevant even when IC matches.

Choose the comparison that matches your question

This family contains 5 size/thickness groups: 0702, 11T3, 1504, 1506, 1906. Compare radii within one group first; moving between groups can change the insert-seat envelope.

Shape and clearance do not identify workpiece material, coating, grade or cutting data. Use an exact catalogue example when available; otherwise confirm a maker’s full designation before ordering.

Product evidence in this family

ISCAR / catalogue example

DCMT 11T304-14 IC20

IC: 9.52 mm
Thickness: 3.97 mm
Radius: 0.4 mm
Grade: IC20

Read the exact catalogue row ↗

Aluminum Machining, PDF page 21 / printed page 19, exact designation row. Exact geometry row and IC20 availability mark in this catalogue. Cutting conditions require the applicable product data; no stock check.

ISCAR / catalogue example

DCMT 11T308-14 IC20

IC: 9.52 mm
Thickness: 3.97 mm
Radius: 0.8 mm
Grade: IC20

Read the exact catalogue row ↗

Find all documented examples in this family →

Source and limits

ISCAR · Metric insert identification ↗ · Single-sheet PDF, sections 1, 2, 4, 5, 6 and 7; visually checked 2026-10-20.

Shape, clearance, configuration and nominal code tables only. No grade, usable-edge count, catalogue availability or acceptance tolerances inferred. Values labeled “code table” are interpretations of a designation, not measurements of a delivered product. Product-row values are reported separately, including differences in printed precision.

See the page-by-page review →