Titanium
Ti-10V-2Fe-3Al
Ti-10V-2Fe-3Al is the TIMETAL 10-2-3 near-beta forging alloy.
Identity / state reference
What distinguishes this material
Deep hardenability does not make one aged strength valid for every section or toughness requirement.
- Designation in this reference
- Ti-10V-2Fe-3Al
- Forms covered by the sources
- Forging
- States to distinguish or confirm
- Solution-treated and aged
- exact cycle must be confirmed
- Temperature and exposure
- No general service-temperature limit or temperature-independent strength is established by this page. Check the temperature and duration for the specific source table and application.
Property evidence for a stated condition
No condition-specific numerical table is reproduced here
The linked sources establish the identity and the stated product/state scope. Obtain the row for your actual form, section, treatment and test conditions before adopting strength, hardness or a thermal limit.
Resolve these conditions next
- Which forging section, solution treatment, ageing cycle and tensile direction are certified?
- Obtain the full material certificate, governing specification/edition, product dimensions and test direction before adopting a property value.
For machining, take the exact grade, supplied condition and measured hardness where applicable into the tool maker’s application data. A generic material-family speed is not a substitute for an operation and tool-specific recommendation.
Sources and what they establish
Reviewed 23 October 2026. A source’s publication date and the review date are different. The scope below identifies the fields checked.
TIMET — TIMETAL 10-2-3
Ti-10V-2Fe-3Al high-strength forging alloy; near-beta description and heat-treatment-dependent strength; no universal aged strength.
TIMET — TIMETAL 10-2-3 ↗Source identity, a named product example and a supplied-batch certificate are different evidence. Cross-standard similarity does not approve substitution.
Corrections from the previous article
- Remove the unverified ASTM Grade 19 similar mapping. The reviewed TIMET source identifies Ti-10V-2Fe-3Al; a similar label is not an approved grade correspondence.
- Remove the fixed 1240 MPa aged value and aircraft-specific suitability inference.
- Remove the untraceable generic machining recommendation (8 %) and cutting-speed ranges; select machining data by actual material condition, tool and operation.
Other references in Titanium
Related references, not equivalent substitutes.