Nickel alloys
NIMONIC 80A
Named alloy identity; UNS does not by itself specify product form, condition, or certificate acceptance.
Identity / state reference
What distinguishes this material
A wrought age-hardenable nickel-chromium alloy. The supplier distinguishes melting/refining routes for extruded and forged products.
- Designation in this reference
- UNS N07080
- Forms covered by the sources
- Bar / rod and other mill forms: verify availability and specification in the linked bulletin
- States to distinguish or confirm
- Solution-treated and aged as ordered
- record melting/refining route
- Temperature and exposure
- A service-temperature statement is not an allowable stress or a guarantee at temperature. Use the specified product condition and exposure duration.
Other search names in these sources
N07080 · NIMONIC 80A
Read the scope above: a source’s related product name is not a blanket interchangeability statement.
Property evidence for a stated condition
No condition-specific numerical table is reproduced here
The linked sources establish the identity and the stated product/state scope. Obtain the row for your actual form, section, treatment and test conditions before adopting strength, hardness or a thermal limit.
Resolve these conditions next
- Which product form and governing purchase specification are on the certificate?
- What heat treatment, cold work and test temperature apply to this lot?
For machining, take the exact grade, supplied condition and measured hardness where applicable into the tool maker’s application data. A generic material-family speed is not a substitute for an operation and tool-specific recommendation.
Sources and what they establish
Reviewed 23 October 2026. A source’s publication date and the review date are different. The scope below identifies the fields checked.
Special Metals: NIMONIC 80A technical bulletin
Grade identity, product forms, treatment distinctions; published property tables remain specific to the conditions stated in the bulletin.
Special Metals: NIMONIC 80A technical bulletin ↗Source identity, a named product example and a supplied-batch certificate are different evidence. Cross-standard similarity does not approve substitution.
Corrections from the previous article
- The old 30–38 HRC range is not a substitute for the required solution/aging schedule.
- Remove unsupported legacy machining percentages and generic cutting-speed tables.
Other references in Nickel alloys
Related references, not equivalent substitutes.