ISCAR PCLNR 2525M-12
Insert pattern: CNMG1204
External turning
Right hand; 25 × 25 mm shank; 95° approach. Non-X holder.
Start with your equipment
I already have a holder.
Match its complete marking. A similar model or insert outline is not a fit confirmation.
9 turning-holder lookup records + 9 source-backed assembly options
ISCAR MWLNR 2020K-08W
Insert pattern: WNMG0804
External turning
Right hand; 20 × 20 mm shank; top-wedge clamp.
ISCAR SCLCR 1616H-09
Insert pattern: CC..09T3
External turning
Right hand; 16 × 16 mm shank; screw clamp. Maker lists a size pattern only.
ISCAR SCLCL 0808F-06
Insert pattern: CC..0602
External turning
Left hand; 8 × 8 mm shank; screw clamp. Preserve the left-hand orientation.
ISCAR SDJCR 1616H-11
Insert pattern: DC..11T3
External turning
Right hand; 16 × 16 mm shank; screw clamp; 93° approach.
ISCAR S20R SDUCR-11
Insert pattern: DC..11T3
Internal turning · minimum bore 25 mm
Right hand; 20 mm machine-side diameter; 200 mm length; minimum bore 25 mm.
ISCAR E16 SCLCR-09 HEAD
Insert pattern: CCMT09T3 / CCGT09T3
Internal turning · minimum bore 20 mm
Right hand; interchangeable head for carbide bar; 16 mm interface; minimum bore 20 mm. Select the matching bar/head assembly.
ISCAR C4 SDJCR-27050-11
Insert pattern: DC..11T3
External turning
Right hand; CAMFIX ISO 26623-1 interface; 40 mm machine-side diameter.
ISCAR PCLNR 2525M-12X
Insert pattern: CNMG1204 / CNMX1207
External turning
Right hand; 25 × 25 mm shank. CNMG1204 requires TCN443 seat; CNMX1207 requires TCX4 seat. Installed seat must be confirmed.
Tungaloy A16M-PCLNR0904-D200
Boring bar: obtain the manufacturer drawing for machine mounting and minimum bore.
This exact insert / grade and holder are named together in the manufacturer case.
Tungaloy ACLNR2525M12-A
25 × 25 mm square shank; overall length 150 mm
This exact insert / grade and holder are named together in the manufacturer case.
Tungaloy AWLNR2525M08-A
25 × 25 mm square shank; overall length 150 mm
This exact insert / grade and holder are named together in the manufacturer case.
Sandvik Coromant R390-012A12-07M
Machine-side chuck / spindle is not identified in the source.
Exact cutter body and three inserts are named in the published slotting case.
Walter AB019-H63-P06-080
HSK-A63 machine connection; direct 6 mm clamping bore. Do not use this plan as a BT40 assembly.
Interface-based candidate: the drill and chuck share documented DIN 6535 HA / h6 requirements. This is not a manufacturer-published tested pair.
Walter AB019-H63-P08-080
HSK-A63 machine connection; direct 8 mm clamping bore. Do not use this plan as a BT40 assembly.
Interface-based candidate: the drill and chuck share documented DIN 6535 HA / h6 requirements. This is not a manufacturer-published tested pair.
Walter AB019-H63-P10-085
HSK-A63 machine connection; direct 10 mm clamping bore. Do not use this plan as a BT40 assembly.
Interface-based candidate: the drill and chuck share documented DIN 6535 HA / h6 requirements. This is not a manufacturer-published tested pair.
ISCAR DGTR 20B-2D35
Right-hand 20 × 20 mm square shank
Manufacturer DGTR / DGN family cross-reference and exact 2 mm insert / holder size. Check the holder capacity chart for the actual work diameter.
ISCAR SER 2020 K16 · anvil selection required
Right-hand, 20 × 20 mm shank; overall length125 mm
Manufacturer holder, 16ER ISO family and worked example. The standard anvil remains conditional on lead angle and threading method.
My holder or assembly is not listed.
Start with the machining job, then enter the tool body or chuck marking at the toolholding step. Missing compatibility evidence stays visible. For a turning holder, read its supported insert designation from the maker’s drawing.
Continue with my equipment →