What the selection guide can establish.

CCGT 060201-AS IC20

Aluminum machining

• Confirm the selected operation and full assembly with the maker.

CCGT 060202-AS IC20

Aluminum machining

• Confirm the selected operation and full assembly with the maker.

CCGT 060202-SF RTC+

Continuous finishing of steel and stainless steel

• Confirm the selected operation and full assembly with the maker.

CCGT 060204-AS IC20

Aluminum machining

• Confirm the selected operation and full assembly with the maker.

CCGT 060204-SF RTC+

Continuous finishing of steel and stainless steel

• Confirm the selected operation and full assembly with the maker.

CCGT 060208F ID4

Finishing aluminum and other non-ferrous materials

• Confirm the selected operation and full assembly with the maker.

CNMG120404-TSF T9215

steel, stainless, castiron / external, internal / finish

• Interrupted-cut evidence is limited to light interruption. Heavy interruption is not established by this record.
• External/internal operation scope is documented at family level; confirm the actual holder, access and cutting direction.

CNMG120408-TM T9215

steel, stainless, castiron / external, internal / medium

• Interrupted-cut evidence is limited to light interruption. Heavy interruption is not established by this record.
• External/internal operation scope is documented at family level; confirm the actual holder, access and cutting direction.

CNMG120408-TH T9235

steel / external, internal / medium, rough

• External/internal operation scope is documented at family level; confirm the actual holder, access and cutting direction.

DNMG150412-TM T9215

steel, stainless, castiron / external, internal / medium

• Interrupted-cut evidence is limited to light interruption. Heavy interruption is not established by this record.
• External/internal operation scope is documented at family level; confirm the actual holder, access and cutting direction.

WNMG080408-TM T9215

steel, stainless, castiron / external, internal / medium

• Interrupted-cut evidence is limited to light interruption. Heavy interruption is not established by this record.
• External/internal operation scope is documented at family level; confirm the actual holder, access and cutting direction.

CCMT09T304-PSF T9215

steel, stainless, castiron / external, internal / finish

• Interrupted-cut evidence is limited to light interruption. Heavy interruption is not established by this record.
• External/internal operation scope is documented at family level; confirm the actual holder, access and cutting direction.

DCMT070204-PSF T9215

steel, stainless, castiron / external, internal / finish

• Interrupted-cut evidence is limited to light interruption. Heavy interruption is not established by this record.
• External/internal operation scope is documented at family level; confirm the actual holder, access and cutting direction.

DNMG150408-SM T6215

stainless / external / medium

• SUS304 wet external-turning case; continuity supported at grade level.

CNMG120408-SH AH6235

stainless / external / rough

• SUS410 interrupted facing case, wet. Interruption severity must be checked for your setup.

VNMG160404-SF AH6225

stainless / external / finish

• SUS440 wet external-turning case; not all stainless conditions.

CNMG120408-HRM AH8015

superalloy / external, internal / medium

• Named case: Inconel 718, wet. Confirm your alloy and condition.
• Interrupted-cut evidence is limited to light interruption. Heavy interruption is not established by this record.
• External/internal operation scope is documented at family level; confirm the actual holder, access and cutting direction.

CNMG120412-HRF AH8015

superalloy / external, internal / finish

• Named case: Inconel 909, wet. Confirm your alloy and condition.
• Interrupted-cut evidence is limited to light interruption. Heavy interruption is not established by this record.
• External/internal operation scope is documented at family level; confirm the actual holder, access and cutting direction.

CNMG090408E-TM T515

castiron / internal / stage requires confirmation

• FC250 case only; ISO-EcoTurn product and named holder, not a generic CNMG assembly.

3QP-TNGA160416 BX480

hardened / internal / stage requires confirmation

• Hardened SCr420 case; hardness not stated. Customized holder is required; no standard TNMG fit claim.

CNMG120408-NM T9225

steel / external / stage requires confirmation

• Named 42CrMo4 case; holder designation is incomplete, so it is not an exact assembly confirmation.

CNMG120408-TH T9215

steel / external, internal / medium, rough

• Interrupted-cut evidence is limited to light interruption. Heavy interruption is not established by this record.
• External/internal operation scope is documented at family level; confirm the actual holder, access and cutting direction.

CNMG120408-SH AH6225

stainless / external, internal / medium, rough

• Interrupted-cut evidence is limited to light interruption. Heavy interruption is not established by this record.
• External/internal operation scope is documented at family level; confirm the actual holder, access and cutting direction.

CCGT09T304-AS IC20

aluminum / external, internal / stage requires confirmation

• Stage and interrupted-cut suitability are not established by the product record.

DCGT070201-AS IC20

aluminum / external, internal / stage requires confirmation

• Stage and interrupted-cut suitability are not established by the product record.

DCGT070204-AS IC20

aluminum / external, internal / stage requires confirmation

• Stage and interrupted-cut suitability are not established by the product record.

DCGT11T304-AS IC20

aluminum / external, internal / stage requires confirmation

• Stage and interrupted-cut suitability are not established by the product record.

CoroMill 790

Aluminum shoulder, deep-cavity and frame milling; high material removal and finishing.

• Select cutter diameter, insert size and serrated interface; check shoulder height, spindle power and mounting.

390R-070204M-PM 1130 + R390-012A12-07M

CoroMill 390 performance case: slot milling steel P2.1.Z.AN.

• Specific insert/cutter pair; slotting case only, not general finishing or arbitrary CoroMill holder fit.

CoroDrill 860-GM

Solid carbide short-hole drilling in ISO P/M/K/H.

• Choose hole diameter, depth, tolerance, hardness/condition, coolant and matching drill shank/chuck.

CoroDrill DE10 · M5C

M5C geometry for cast iron; exchangeable-tip drilling.

• M5C 9.00–17.90 mm; choose matching DE10 tip/body, depth and machine interface.

CoroCut 2

Printed page 9: parting, external/internal/face grooving and profiling; ISO P/M/K/N/S.

• Select groove type, width/depth, diameter, insert hand, grade and matching CoroCut 2 seat.

CoroThread 266 · GC1125

Threading grades/material table: steel/cast iron, non-ferrous with suitable F geometry.

• Choose profile, pitch, internal/external orientation, insert hand, system size and helix shim.

CoroThread 266 · GC1135

Threading grades/material table: stainless and heat-resistant alloy/titanium group, F geometry.

• Low-to-medium-speed application range; choose profile, pitch, system size, hand and helix shim.

CoroThread 266 · CB7015

CBN-tipped threading of hardened components, HRC 55–62.

• Requires HRC 55–62 and limited cutting depth; select profile/pitch and matching CoroThread assembly.

CoroMill MS20

Roughing and finishing shoulder milling in stainless steel; M-M20 direction for austenitic/duplex stainless.

• Select the proprietary MS20 cutter/insert, diameter, spindle interface, grade, engagement and coolant.

Walter Titex DC166 Supreme

PDF14–15: aluminum / ISO N drilling. Standard 3–12 mm, 5×Dc, internal coolant.

• Standard 5×Dc range only; custom 30×Dc is a separate configuration. Select diameter/depth, tolerance and DIN6535HA shank matching the chuck.

BXA10 · HP hard-turning geometry

HP finishing of hardened parts; BXA10 continuous/light interrupted direction.

• Hardened steel ≥50 HRC; exact steel condition and upper hardness capability need review. Select full insert, edge and holder.

SX6 ceramic grade

Gray cast iron rough turning, FC150 brake-disc case with as-cast skin.

• Gray cast iron only, not every cast iron. Select a ceramic insert geometry and matching holder; interruption severity remains unverified.

CoroTurn Prime A · L3 / H13A

Titanium section: Prime A finishing with L3 geometry and H13A.

• Proprietary PrimeTurning holder and toolpath required. Select exact SKU and alloy/condition; no generic ISO holder substitution.

CoroTurn Prime B · H3 / H13A

Titanium section: Prime B H3 / H13A for semi-rough and rough turning.

• No complete B-type SKU verified here. Dedicated PrimeTurning holder and reprogramming required; confirm alloy and condition.

DC166-05-06.000A1-WJ30UU

Aluminum drilling with internal coolant

• Lc is a catalogue drilling-depth dimension, not flute length. Confirm full-diameter depth, drill-point allowance and breakthrough/approach allowance.
• Confirm chuck, coolant delivery and alloy-specific cutting data.

DC166-05-08.000A1-WJ30UU

Aluminum drilling with internal coolant

• Lc is a catalogue drilling-depth dimension, not flute length. Confirm full-diameter depth, drill-point allowance and breakthrough/approach allowance.
• Confirm chuck, coolant delivery and alloy-specific cutting data.

DC166-05-10.000A1-WJ30UU

Aluminum drilling with internal coolant

• Lc is a catalogue drilling-depth dimension, not flute length. Confirm full-diameter depth, drill-point allowance and breakthrough/approach allowance.
• Confirm chuck, coolant delivery and alloy-specific cutting data.

ECA-B-3 08-20C08-63 IC08

milling / aluminum

• APMX 20 mm is a geometry limit, not approval of a full-depth, full-width pass.
• Confirm cylindrical-shank chuck, radial engagement, toolpath and alloy cutting data.

ECA-B-3 05-14C06-57 IC08

milling / aluminum

• APMX 14 mm differs from LU 18.7 mm. The longer usable length does not permit an 18 mm axial cut.
• Confirm cylindrical-shank chuck, radial engagement, toolpath and alloy cutting data.

DGN 2002C IC328

grooving / steel, stainless, superalloy, titanium

• CW 2 mm ±0.03; confirm groove tolerance and strategy. Wider grooves need separate strategy validation.
• CDX 18 mm is an insert limit; holder and access may reduce it. Do not infer a 36 mm parting capacity.

16ER 1.50 ISO IC908

threading / steel, stainless

• External ISO metric DIN13, 60° full profile; confirm tolerance requirements.
• Right-hand INSERT does not establish finished-thread hand. Confirm holder, shim/helix angle and feed direction.

ISCAR PCLNR 2525M-12

Published insert pattern: CNMG1204

• Right hand; 25 × 25 mm shank; 95° approach. Non-X holder.

Product specifications / Master Insert Identification (MIID). Pattern match is not complete assembly approval.

ISCAR MWLNR 2020K-08W

Published insert pattern: WNMG0804

• Right hand; 20 × 20 mm shank; top-wedge clamp.

Product specifications / Master Insert Identification (MIID). Pattern match is not complete assembly approval.

ISCAR SCLCR 1616H-09

Published insert pattern: CC..09T3

• Right hand; 16 × 16 mm shank; screw clamp. Maker lists a size pattern only.

Product specifications / Master Insert Identification (MIID). Pattern match is not complete assembly approval.

ISCAR SCLCL 0808F-06

Published insert pattern: CC..0602

• Left hand; 8 × 8 mm shank; screw clamp. Preserve the left-hand orientation.

Product specifications / Master Insert Identification (MIID). Pattern match is not complete assembly approval.

ISCAR SDJCR 1616H-11

Published insert pattern: DC..11T3

• Right hand; 16 × 16 mm shank; screw clamp; 93° approach.

Product specifications / Master Insert Identification (MIID). Pattern match is not complete assembly approval.

ISCAR S20R SDUCR-11

Published insert pattern: DC..11T3

• Right hand; 20 mm machine-side diameter; 200 mm length; minimum bore 25 mm.

Product specifications / Master Insert Identification (MIID). Pattern match is not complete assembly approval.

ISCAR E16 SCLCR-09 HEAD

Published insert pattern: CCMT09T3 / CCGT09T3

• Right hand; interchangeable head for carbide bar; 16 mm interface; minimum bore 20 mm. Select the matching bar/head assembly.

Product specifications / Master Insert Identification (MIID). Pattern match is not complete assembly approval.

ISCAR C4 SDJCR-27050-11

Published insert pattern: DC..11T3

• Right hand; CAMFIX ISO 26623-1 interface; 40 mm machine-side diameter.

Product specifications / Master Insert Identification (MIID). Pattern match is not complete assembly approval.

ISCAR PCLNR 2525M-12X

Published insert pattern: CNMG1204 / CNMX1207

• Right hand; 25 × 25 mm shank. CNMG1204 requires TCN443 seat; CNMX1207 requires TCX4 seat. Installed seat must be confirmed.

Product specifications / Master Insert Identification (MIID). Pattern match is not complete assembly approval.